Can I use the Eros?

Todd R · 1643

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Todd R

  • Full Member
  • ***
    • Posts: 135
on: April 07, 2017, 01:04:03 PM
I think so.....just want to confirm first.
I have a step up transformer feeding my current phono stage a 47K signal, however my cables from the phono stage to the amp are 2.5M. The amp has a 100K input impedance, and the Eros page says it's looking for a pre amp with at least 15K, but cables 1m or less.
Should work, right?


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #1 on: April 07, 2017, 01:10:23 PM
Yup, it will be fine, assuming that the cables are not super high capacitance.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »