Decided to go a little custom!

1026mind · **on:** October 16, 2017, 03:54:23 PM

A little different

Karl5150 · **Reply #1 on:** October 23, 2017, 08:01:34 AM

A little? Looks awesome.

1026mind · **Reply #2 on:** October 23, 2017, 08:44:04 AM

Thank you, I will post more pictures soon!

Paul Birkeland · **Reply #3 on:** October 24, 2017, 04:52:48 AM

You aren't going to get any signal out of that as it's wired.

1026mind · **Reply #4 on:** October 24, 2017, 04:55:15 AM

its still work in progress!

1026mind · **Reply #5 on:** November 20, 2017, 12:15:20 PM

Its finished, the left channel has a little bit of distortion!

1026mind · **Reply #6 on:** November 22, 2017, 06:19:28 AM

Solved the distortion on the left channel however when the needle is not down and I turn the volume up there is hum and interference. Please advise!

Paul Birkeland · **Reply #7 on:** November 22, 2017, 06:25:18 AM

however when the needle is not down and I turn the volume up there is hum and interference. Please advise!

If you play a record at this level, is it unlistenably loud?

I notice that there are six 0.001uF caps in your build, what are they for?

1026mind · **Reply #8 on:** November 22, 2017, 06:29:59 AM

Wow! Went happy on the zeroes, it should be 3x0.01! Thank you!

1026mind · **Reply #9 on:** November 22, 2017, 07:20:22 AM

I added 2x0,01, huge improvement! how high can i go with the value of that capacitor?

Paul Birkeland · **Reply #10 on:** November 22, 2017, 07:22:27 AM

I added 2x0,01, huge improvement! how high can i go with the value of that capacitor?

If this is suppose to be the 0.03uF capacitor in the RIAA EQ, you can go as low as 0.029uF and as high as 0.031uF.

1026mind · **Reply #11 on:** November 22, 2017, 07:30:43 AM

Got it! Thank you very much!