Matched Tubes?

adydula · 1018

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline adydula

  • Sr. Member
  • ****
    • Posts: 279
on: February 27, 2018, 12:01:50 PM
I think I know the answer but want to make sure...

Are tightly matched tube 6c45p's necessary or desireable in the Mainline?

or

Is the circutry able to bias the tubes with the pot's well enough for good operation?

Thanks
Alex


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: February 27, 2018, 12:37:05 PM
Quote from: adydula on February 27, 2018, 12:01:50 PM

Is the circutry able to bias the tubes with the pot's well enough for good operation?

p. 74

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline adydula

  • Sr. Member
  • ****
    • Posts: 279
Reply #2 on: February 28, 2018, 01:28:39 AM
Thanks Josh...

I guess as a tube ages the more these pots might be tweaked until you can get them to the correct voltage for "optimum" performance.
Thanks again, looking forward to my build!

Alex


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5768
Reply #3 on: February 28, 2018, 04:22:52 PM
Normally, with most tubes, there will be some drift over the first 100 hours or so, then the bias drift will be fairly slow as long as the item is in regular use.

Paul Joppa

Pages: 1   Go Up
« previous next »