mW output on Crack-a-two-a?

HF9 · 3176

0 Members and 1 Guest are viewing this topic.

Offline HF9

  • Sr. Member
  • ****
    • Posts: 346
  • Zynsonix.com
    • Zynsonix.com
on: March 12, 2018, 12:59:26 PM
I was curious if there was a mW output rating available on Crack-a-two-a at various ohms (e.g. 300ohms, 600ohms, etc.)? I assume it is different than the Crack given the different power supply. Thanks!

My DIY Audio Electronics Blog: DIYAudioBlog.com


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9672
    • Bottlehead
Reply #1 on: March 12, 2018, 01:08:49 PM
Since they run at the same operating point output is the same. Max output is about 10V into 300ohms.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.