News:
September 28, 2023, 05:39:04 PM

Author Topic: Finished build, 2 dark LED's on C4S [resolved]  (Read 1420 times)

0 Members and 1 Guest are viewing this topic.

Offline itsikhefez

  • Jr. Member
  • **
  • Posts: 19
Re: Finished build, 2 dark LED's on C4S [solved]
« Reply #15 on: January 22, 2019, 11:18:39 PM »
OK so, good news is that it is now working!!

Looking at the schematic, besides a faulty part, this would only mean a problematic joint in D2 or the MJE5731A.
So.. I reheated them once... and then again with some more solder, and it started working.

I guess I WAS over confident.. and PB hit the nail on the head from the start.

Thanks again... now off to hear some good music!

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 18679
Re: Finished build, 2 dark LED's on C4S
« Reply #16 on: January 23, 2019, 05:05:53 AM »
Good job debugging! 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man