what is the function of the 0 ohm resistor in the kaiju circuit?

joepiecuch · 747

0 Members and 1 Guest are viewing this topic.

Offline joepiecuch

  • Full Member
  • ***
    • Posts: 63
Tried to search the forum but the search function won't let me use '0' as a term. what does the 0 ohm resistor do that a jumper would not? tried googling, too, and could only come up with references to them being used as jumpers on PCBs.   



Online Tom-s

  • Sr. Member
  • ****
    • Posts: 492
0-ohm resistors are indeed just jumpers.

I don't own the Kaiju kit. But i've seen use of 0 ohm resistors to act as a jumper in 2 occasions (in my own BH kit and pictures of others). Using a short wire can be a pain (because you need some length to be able to strip its insulation).

1. To reference speaker output to ground. Used here because a 0-ohm resistor is easier to work with in short lengths vs thin wire.
2. To function as an insulated jumper on a PC board. Where the short length of the resistor comes in handy and it's insulated from the copper connections just below it.

Maybe the crew will add a few functions i don't think off.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Tom S nailed it.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man