Slightly high voltages in speedball large board

Th3RadMan · 517

0 Members and 1 Guest are viewing this topic.

Offline Th3RadMan

  • Newbie
  • *
    • Posts: 6
on: April 26, 2019, 09:32:06 PM
Everything in my build so far has worked perfectly.  At the final voltage check for the large board I noticed the oa and ob terminals were reading 108-109v.  The manual says 75-100v, so I wanted to come here to check to see if this is ok or not.  I can post pics or any other info if there is an issue.

Thanks!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: April 27, 2019, 06:07:03 AM
That is close enough to be OK. 

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Gweldin

  • Newbie
  • *
    • Posts: 1
Reply #2 on: October 13, 2019, 12:16:54 PM
What about 115v at both OA and OB? Still ok?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #3 on: October 13, 2019, 12:41:56 PM
What about 115v at both OA and OB? Still ok?
What are your OA and OB voltages on the small board?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man