3 twists per inch

Love Rhino · 4952

0 Members and 1 Guest are viewing this topic.

Offline Love Rhino

  • Jr. Member
  • **
    • Posts: 42
on: December 30, 2019, 10:53:21 AM
Having fun putting this together!  When twisting the wire to the 3 twists per inch, I feel like I’m getting too much unraveling when I remove them from the vise, taking it down closer to 2 twists per inch.  How important is the twist?  Is it crucial for all the wires to be equal in their twists per square inch?

Am I just a mega noob completely overthinking this, or is this super important?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: December 30, 2019, 10:57:36 AM
It's not all that critical.  They do unwind a little bit as you're building the cord, before you finish the braiding. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Love Rhino

  • Jr. Member
  • **
    • Posts: 42
Reply #2 on: January 01, 2020, 12:22:41 PM
Am I crazy with how good this sounds?

It looks like I’ll be eating my words for every time I told someone that cables of any type don’t matter.  Thanks Bottlehead!



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9538
    • Bottlehead
Reply #3 on: January 02, 2020, 10:38:05 AM
If the wire unwinds a little compensate by overwinding a bit, like 3.5 turns per inch. That way when it eases off it should be closer to 3 turns per inch.   

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Love Rhino

  • Jr. Member
  • **
    • Posts: 42
Reply #4 on: March 09, 2020, 12:07:16 PM
Would the power cord be just as effective with the mainline as it would be with the crack?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #5 on: March 09, 2020, 01:33:49 PM
Would the power cord be just as effective with the mainline as it would be with the crack?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Love Rhino

  • Jr. Member
  • **
    • Posts: 42
Reply #6 on: March 10, 2020, 06:28:00 PM
I just see a quote of my question, I might be doing something wrong. :) 

The reason I ask is because I only have one cord, but two Bottlehead amps, the crack and mainline.  If the cord kit has a significantly less effect on the mainline based on its structure I’ll keep it on my crack.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9538
    • Bottlehead
Reply #7 on: March 10, 2020, 06:39:46 PM
Have you tried it on the Mainline?

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.