Bottlehead Crack for turntable use?

malagacoolers · 617

0 Members and 1 Guest are viewing this topic.

Offline malagacoolers

  • Newbie
  • *
    • Posts: 1
on: March 18, 2020, 01:09:03 PM
Just stepping foot into the headphone world after recently completing my first setup:

Table: Technics SL-Q2 
Cartridge: AT-VM540ML
Receiver: Denon x3400h 
Preamp:  Micromega MyGroov MM/MC 
Speakers: Ascend Acoustics CMT-340
Headphones: Sennheiser HD 600

My HD 600s sound awful through my Denon receiver's headphone input. When I research what amp compliments the HD 600 best I find that the Bottlehead Crack comes up most often. However, I haven't been able to find much information on how the Crack works amongst a turntable set-up. Do I have the right gear for this sort of thing? Should I entertain another option entirely? Thanks for helping a newbie out with some guidance!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: March 18, 2020, 01:11:01 PM
You can definitely plug the outputs of the MgGroov into the Crack; that will work nicely.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Laudanum

  • Sr. Member
  • ****
    • Posts: 916
Reply #2 on: March 19, 2020, 09:28:59 AM
I use the Crack, usually with a Technics SL-1200.   I use a Seduction phonostage.   Works great.

Desmond G.