Stereomour2 stunt regulator [resolved]

kivanculgener · 487

0 Members and 1 Guest are viewing this topic.

Offline kivanculgener

  • Jr. Member
  • **
    • Posts: 17
on: April 27, 2020, 01:50:50 AM
Hi everyone
   I am now prepairing my shunt regulator and released that  330k ohm 3w resistors
been send instead of 300k ohm for R4 .is it important.?...🙄
« Last Edit: April 27, 2020, 07:12:11 AM by Paul Birkeland »



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: April 27, 2020, 05:19:38 AM
Oddly enough, you can definitely use 330K resistors in place of the 300K resistors.

OA and OB in the voltage checks will be about 330V instead of 300V, which isn't a problem at all.  Kreg voltages will be a little on the high side as well, but still well within operational limits.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline kivanculgener

  • Jr. Member
  • **
    • Posts: 17
Reply #2 on: April 27, 2020, 06:50:24 AM
Thank you very much.