Installing 33K and 75K resistors to volume pot (no lines on resistors)[resolved]

Colonl_Charisma · 371

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Colonl_Charisma

  • Full Member
  • ***
    • Posts: 219
on: November 14, 2020, 10:30:33 AM
Hi all,

I received my 33K and 75K RN55D resistors from Digi-Key. My Crack (no Speedball) is very loud even at low volumes + a little channel imbalance until I increase the volume. I saw FAQ #3 provides a solution, but I’m unsure of the correct orientation of the resistors since there are no lines on them.
« Last Edit: November 14, 2020, 03:48:18 PM by Paul Birkeland »

Ross

Offline Colonl_Charisma

  • Full Member
  • ***
    • Posts: 219
Reply #1 on: November 14, 2020, 10:37:18 AM
Unable to post pictures at the moment, but the resistors are just brown with numbers indicating what they are.

Ross

Deke609

  • Guest
Reply #2 on: November 14, 2020, 11:12:23 AM
Resistors don't have an orientation or direction. Just stick them in where Paul indicates in FAQ #3 and you'll be good to go.

cheers, Derek


Offline Colonl_Charisma

  • Full Member
  • ***
    • Posts: 219
Reply #3 on: November 14, 2020, 11:38:00 AM
Thank you! Thought I’d make sure before I did anything.

Ross

Offline Colonl_Charisma

  • Full Member
  • ***
    • Posts: 219
Reply #4 on: November 14, 2020, 02:20:27 PM
Just installed the resistors, let the tubes warm, and played some music. Everything sounds great!

Ross

Pages: 1   Go Up
« previous next »