Replacing 0.1F 100V Ceramic Capacitor for Eros2

taffet · 857

0 Members and 1 Guest are viewing this topic.

Offline taffet

  • Jr. Member
  • **
    • Posts: 16
on: April 17, 2021, 07:20:44 AM
Hi-

I snapped a 0.1F 100V cap while assembling my Eros 2 kit. Can I use any replacement or does it have to be a Z5U? Do I need to wind the lead with the other one that goes through the 23U or can I just connect it separately with a good connection to the 23U plate?

Thanks much!!!!! Michael



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: April 17, 2021, 07:45:58 AM
The Z5U is the desired part, I would pause your build and order up a replacement from replacementparts(at)bottlehead(dot)com.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline taffet

  • Jr. Member
  • **
    • Posts: 16
Reply #2 on: April 17, 2021, 07:56:26 AM
Thank you Paul! i will do that right now! Michael