Bottlehead Kits > Reduction

Left side louder than Right side

(1/1)

jamesondrums:
The left output is objectively louder than the Right output. Not really sure what to do.... HELP!!!!!!!!

Paul Birkeland:
How are the DC voltages?  Have you tried reflowing your solder joints?

Do you have access to a phone with a headphone jack?  If so I would download a signal generator app and buy a 1/8" TRS to RCA cable and we can use that to figure out whether the loud channel or the softer channel is the problem.

Doc B.:
Start by switching tubes in the sockets to see if the discrepancy follows the tubes, then check voltages as PB says.

Navigation

[0] Message Index

Go to full version