Other Gear > Phono
Uturn audio-no sound
aragorn723:
I just changed the cartridge on my Uturn Orbit, and now don't have any sound at all with the new cartridge. Only sound is a loud humming sound. What could be wrong?
Dave
Thermioniclife:
Is there a ground wire connected the phono preamp. Terrible buzz is an indication of a poor or no ground.
aragorn723:
There is no ground wire from the Uturn to the phono preamp , it's internally grounded. I'm wondering if maybe the cartridge wires aren't hooked up right? The London cartridge has color coding on the pins.
Red-right channel positive
Green-right channel negative
White-left channel positive
Blue-left channel negative
The wires from the Uturn had these colors, so I just matched red to red, blue to blue, etc. Maybe Uturn is using a non-standard color scheme?
Dave
Thermioniclife:
I am not familiar with that cartridge but you need a good ground to the pre. does the cart mounting tabs have a conductive pad on them? If so you can try a small gauge wire connected to one of the cart mounting screws to the phono pre as a test. It's been decades since I have had a turn table and vinyl. Perhaps you could call the manufacturer for advise.
oguinn:
U-Turn has really great customer service. I’d email or call them
Navigation
[0] Message Index
[#] Next page
Go to full version