Bottlehead Kits > MonAmour

Screws for the LARGE transformer cover...

(1/3) > >>

Ivan303:
Nope.  Neither had them attached to the bottom but....

As a DIYer who is also a screw-loser, I have a large assortment of black hex head screws in that particular size (M3) and of assorted lengths so I am fine.



The smaller cover came equipped with LARGE silver Philips head screws and all went together nicely.  Manual is great (so far) and, thanks to the size (large) and being a Mono Block, the mechanical parts seem to go together much easier than the S.E.X. amp with WAY to much stuff squeezed into a small package. 

Paul Birkeland:
The SEX amp is a rather full little chassis.  I'm glad you were able to source some M4 screws. 

-PB

Doc B.:
Sorry about that. There should have been 8 little flat head Phillips screws included for those covers. We have an issue with them missing from the packing list, and we will address that.

Thermioniclife:
Just to let you know my kits were missing them also. No big deal, a quick trip to the hardware store and all was good.

RdDgWest:
Hi
Just started the MonAmour build.  Got to the step for the large transformer cover and found no screws in the bottom of the cover. 
What is the spec for the screws? 
Appears to be M4 but what is the length needed?

Navigation

[0] Message Index

[#] Next page