Multimeter buying advice

Clover · 13074

0 Members and 1 Guest are viewing this topic.

Offline Clover

  • Full Member
  • ***
    • Posts: 53
on: September 15, 2021, 10:42:14 AM
I ordered my first kit, partially to learn new skills.  When I went and checked my multimeter, I realized it only goes to 300 V DC so I am going to need to buy a new multimeter that will work for the S.E.X build.  Part of this was to learn how to use these tools and I am also planning to use the multimeter for the wiring on a kit car build I am doing.  I honestly have no idea how to use the thing and have a pretty limited understanding of circuits so I'm not even really sure what I need.  I saw suggestions for a used Fluke but everything I am seeing around me are the more professional models that are not real affordable.  I starting looking at the 117 and and 106 and 87  which seem more affordable but since I don't really understand the tool and how it is used for various things, I'm not sure what I need.

Is there a specific Fluke models people recommend for kit building/automotive/general use?  I'm not exactly looking for the cheapest in the world and I want to get a quality tool that will last me and not leave me wanting something else better next year.  At the same time, I know I don't need some of these things I am coming across.  I'm not even sure where to start or what to look for.

Thanks for the guidance. 



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20126
Reply #1 on: September 15, 2021, 11:07:13 AM
I would buy one of these:
https://www.harborfreight.com/11-function-digital-multimeter-with-audible-continuity-61593.html

and put these probes on it:

https://www.amazon.com/Silicone-Multimeter-Precision-Gold-Plated-Alligator/dp/B082L2SVGB

When the Fluke 174 that I have dies, I will replace it with a HFT meter.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Clover

  • Full Member
  • ***
    • Posts: 53
Reply #2 on: September 16, 2021, 04:28:53 AM
Thanks.  Always nice when a HF tool is a good option.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20126
Reply #3 on: September 16, 2021, 04:46:32 AM
There are higher priced meters at HFT that are autoranging, but that one is going to do the job just fine.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Tabaia

  • Newbie
  • *
    • Posts: 2
Reply #4 on: February 23, 2025, 10:53:51 PM
Hi,
I coudn't find the multimeter you recommended.
As I am from Australia, would you kindly recommend one for me.
Perhaps on Amazon or Ebay could make it easier.

Ta Beia




Offline Tabaia

  • Newbie
  • *
    • Posts: 2
Reply #6 on: February 26, 2025, 06:09:23 PM
Thanks for the info.
I ended up getting a fluke 101 .
Hope that will do the trick.
I know nothing but am courageous.
Learning and experience will come
 :)