Bottlehead Kits > MonAmour

Power Transformer Secondary Test

(1/1)

Aural Robert:
Good morning all.

I've started my build and the secondary voltages don't measure correctly. My line voltage is 119V +/- so I used the wiring instructions on pg 31.

I get the right voltages at 7 & 9, but 0L at 11 and 12 on both amps. Not sure what I'm doing wrong here. Any advise or troubleshooting tips? I've built at least 8 other BH pieces with no issues. Replies appreciated.

TIA. Aural Robert.

Paul Birkeland:
Your meter likely isn't autoranging, so you'll need to turn up the AC voltage setting so the voltage coming out of the transformer isn't over limit.

Navigation

[0] Message Index