News:
June 04, 2023, 12:49:37 AM
« previous next »
Pages: [1]   Go Down

Author Topic: Solder joint  (Read 496 times)

0 Members and 1 Guest are viewing this topic.

Offline Knightstick

  • Full Member
  • ***
  • Posts: 78
Solder joint
« on: November 04, 2021, 01:59:29 PM »
Hello, I'm wondering if these large solder joints are okay. I had real trouble getting them all to fit. I heated everything very thoroughly and pushed quite a bit of solder given it is 3 wires. I heated from one side and fed solder from the other. I hope this is adequate. I'm I'm talking about 36.
« Last Edit: November 04, 2021, 02:01:59 PM by Knightstick »
Logged
Adam

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 18351
Re: Solder joint
« Reply #1 on: November 04, 2021, 02:45:36 PM »
I would use more heat and more time.  Hopefully the solder you're using has lead in it as well.
Logged
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man
Pages: [1]   Go Up
« previous next »