News:
January 17, 2022, 08:39:31 PM

Author Topic: Speedball installation - Terminal 12U  (Read 61 times)

0 Members and 1 Guest are viewing this topic.

Offline Nils

  • Newbie
  • *
  • Posts: 1
Speedball installation - Terminal 12U
« on: January 03, 2022, 08:58:23 AM »
I am installing the Speedball kit.

I need to do the small board test as specified on page 18 in the manual

I am supposed to connect the negative lead of the volt-meter to terminal 12U.

I can not find the terminal 12U on the board and it is not mentioned in the Speedball manual. I assume the information can be found in the Crack manual, but I bought the Crack used I did not get a manual with it.

Where is terminal 12U located?

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 16069
Re: Speedball installation - Terminal 12U
« Reply #1 on: January 03, 2022, 10:09:07 AM »
You can use the bare piece of wire between the two outer tabs on the RCA jacks instead of terminal 12.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man