Balance with Mourquiet?

Karl5150 · 775

0 Members and 1 Guest are viewing this topic.

Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 618
on: January 20, 2022, 04:32:32 AM
"There is a way to retain the balance control with the BeePre 2 and its upgrades, but you'd need to install the balance control in a hole on the wood base or somewhere else on the chassis plate."
Paul, I saw this the other day and I am curious if the same/similar could be installed in an SII, and would there be a potential sonic penalty? (Understanding that replacing the stock vol/balance pots with the Mour/Bee quiet is designed to improve sonics)
Karl 

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Reply #1 on: January 20, 2022, 05:23:06 AM
On the Stereomour II, you would have to do something very different and the only thing I could come up with would change the performance of the amp a bit on the attenuated channel and that doesn't seem optimal.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 618
Reply #2 on: January 20, 2022, 06:51:31 AM
Always trying to have my cake and and eat it too.
Thanks for the quick reply.
Karl

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77