Hum Pot adjustments [resolved]

ArtnShit · 58483

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19822
Reply #90 on: March 01, 2022, 05:50:06 AM
Replacing the 130 ohm 2W resistors with 27 ohm 2W resistors can take that out, as will the second upgrade that we are releasing shortly.  The noise shouldn't be intrusive under normal listening conditions.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline ArtnShit

  • Full Member
  • ***
    • Posts: 115
Reply #91 on: March 01, 2022, 06:07:27 AM
Yeah, it pretty much disappears once the music is actually playing. If I were to swap out the resistors would that impinge on the new upgrade down the pipeline at all? Is there a specific resistor/brand you'd recommend?

Thanks!

a&s


Offline ArtnShit

  • Full Member
  • ***
    • Posts: 115
Reply #92 on: March 01, 2022, 06:09:13 AM
Just found your post on it! putting in that order! Thanks PB!

a&s


Offline ArtnShit

  • Full Member
  • ***
    • Posts: 115
Reply #93 on: March 01, 2022, 06:11:55 AM
What's the time frame of the second update?

a&s


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19822
Reply #94 on: March 01, 2022, 06:45:10 AM
I just received the missing pieces I need to build my BeePre out according to the manual instructions.  I'm at the tail end of a flood of repairs (8 arrived in the span of 3 days!) and custom builds, then I can move onto this.  One of those repairs remains, as do two Stats that need to get built first.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man