help requested: no sound

hiimlowell · 2256

0 Members and 1 Guest are viewing this topic.

Offline hiimlowell

  • Newbie
  • *
    • Posts: 1
on: January 16, 2011, 11:08:08 PM
I have finished building my Crack amp only to find that there's no sound whatsoever (in either channel), not even any hum or static. Zero, as if the headphones were unplugged (they weren't).

I rechecked my soldering and everything appears to be fine. The tubes warm up and glow, I just get no sound.

Could a whole part be broken? I'm also thinking maybe there is some proper way to solder the rca jacks -- I put the wires in and made sure there was contact at the rim, then filled the hole with solder. Am I doing something wrong? What are the possible problems?

Thank you very much for your time and help.

- Lowell



Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #1 on: January 17, 2011, 01:58:20 AM
Lowell,

The first question here is going to be what was the results of your resistance and voltage checks?

You need only to post those that were wrong by more than 15%.



Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #2 on: January 19, 2011, 06:05:24 AM
Are you there?