Voltage Test [resolved]

hpleung · 1284

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline hpleung

  • Full Member
  • ***
    • Posts: 125
on: April 09, 2022, 11:09:02 AM
Hi,

I am just starting with my Kaiju (Limited Edition, Walnut). I did a voltage test at the beginning and tested:

1/ 119.3 volts when plugged in and Switch is On.
2/ 1.7 volts when plugged in and Switch is Off
3/ 0.02 volts when plugged off and Switch off.

The measuring device is a Fluke.

Is this normal? Shouldn't I get 0 volts in both 2 and 3 above?

Thanks.
« Last Edit: April 09, 2022, 01:37:29 PM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19365
Reply #1 on: April 09, 2022, 01:06:23 PM
Your DVM has a very high input impedance and is happy to measure induced 60Hz noise, so what you're seeing isn't abnormal.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline hpleung

  • Full Member
  • ***
    • Posts: 125
Reply #2 on: April 09, 2022, 01:34:53 PM
Thank you


Pages: 1   Go Up
« previous next »