Ground wire to transfromer lug

photoduo · 1205

0 Members and 1 Guest are viewing this topic.

Offline photoduo

  • Newbie
  • *
    • Posts: 9
    • Photography / Video
on: May 01, 2022, 08:52:13 AM
The ground wire from IEC goes to a chassis ground tab then to the transformer ground tab.
Why does the wire not just run straight from IEC ground to transformer ground tab. ???
Just curious as usual.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: May 01, 2022, 09:01:33 AM
There are some safety regulations that suggest that the connection from IEC safety ground to the chassis be as short as possible.  It would conceivably be possible to simply combine the chassis ground and one of the transformer screws with no chassis insulators, but this introduces a moderately likely possibility that hardware mix-ups would allow for a floating chassis plate.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline CORedhawk

  • Jr. Member
  • **
    • Posts: 36
Reply #2 on: May 02, 2022, 10:12:39 AM
Just wondering about that myself.... Thanks for asking.