Cut both ends of drain wire by accident!

EL84Fan · 757

0 Members and 1 Guest are viewing this topic.

Offline EL84Fan

  • Newbie
  • *
    • Posts: 6
on: June 05, 2022, 06:02:01 AM
Hi,   

Whilst building my S.E.X Kit i accidentally cut both ends of the drain wire off of the power input wire (324mm)
shielded twisted pair cable. I wanted to ask if it was possible to pull the drain cable through the long end to reveal 13mm of drain cable
as the short end drain cable is cut off flush and not connected to anything?

Thanks, Grant.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19353
Reply #1 on: June 05, 2022, 06:13:30 AM
Yes, you can slide a bit of the drain wire out and what's left inside the cable will have sufficient contact with the foil.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline EL84Fan

  • Newbie
  • *
    • Posts: 6
Reply #2 on: June 05, 2022, 06:28:32 AM
Thats great paul, thank you very much for replying.

Going to step away for today before i make any more "auto pilot" mistakes!

Thanks again.