First time builder - failed voltage check [resolved]

shroomalistic · 7916

« previous next »
Pages: 1 2 3 4   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #45 on: May 05, 2023, 11:24:49 AM
You need to replace both LEDs on the 9 pin socket and double check that the black wire going to the center pin of the 9 pin socket is well connected and well soldered on both ends.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline shroomalistic

  • Jr. Member
  • **
    • Posts: 28
Reply #46 on: May 05, 2023, 11:49:18 AM
LEDs should be here sometime today,  ive already got everything unsoldered there now.


Offline shroomalistic

  • Jr. Member
  • **
    • Posts: 28
Reply #47 on: May 05, 2023, 01:56:36 PM
Finally,  its working!!!!!

THANK YOU PAUL!!!!!!!!!!

Got the LEDs in there all nice and neat and all voltages got into line.   

Thank you so much for walking me threw this and putting up with my crap. 

Time to sell my darkvoice

« Last Edit: May 05, 2023, 01:59:56 PM by shroomalistic »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #48 on: May 05, 2023, 03:54:49 PM
Sweet!

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1 2 3 4   Go Up
« previous next »