Bottlehead Kits > Paramount

Ohm switch mod

(1/3) > >>

Rob Capizzi:
Hello again, I would like to install an ohm switch for the paramount. I have the manual and will see in there what will help me. But any wiring diagram would help. What perticular switch and wire should I use? Thank you. 

Paul Joppa:
I believe I have a diagram; I'll be back in town Sunday and will look for it.

Rob Capizzi:

--- Quote from: Paul Joppa on November 24, 2023, 06:25:07 PM ---I believe I have a diagram; I'll be back in town Sunday and will look for it.

--- End quote ---
Awesome! Have a great weekend!

Adrian:
I performed a similar mod to my S.E.X 3.0.
I posted this mod under the S.E.X. forum.
It is on page 7 dated January 25.2021, titled "4-8 ohm switch".
There is a diagram showing the wiring of the switch and pictures of the connections for the S.E.X. amp.
This isn't a Paramount (I also have a pair of these), but it may give you some guidance on how to proceed.

Adrian:
To clarify, you could use the same switch on both mono blocks.
You would only utilize half of the contacts, though.

Navigation

[0] Message Index

[#] Next page