Bottlehead Kits > Moreplay

Question regarding Moreplay upgrade kit.

(1/1)

Thermioniclife:
Does the upgrade kit take the 9.4 Vac and output 6.3Vdc and removing the dropping resistors for the heaters?
Thanks in advance.

Paul Birkeland:
Yes.

Thermioniclife:
Roger that PB. i have a motorized Alps 10 k log pot from a failed / abandoned project that I can use to give remote volume control on the Moreplay..
being that I'm handicapped that would be cool. I use the Moreplay in my kitchen with a s3x and a pair of Overnight sensations, sounds good. IIRC Alps specs state 4.5 to 6.5 Vdc to operate the motor and I believe I measured the current draw of the motor was 50ma max. Can use a 7805 voltage reg to power a 2 channel IR relay board. Thanks for the reply.
Regards, Lee

Paul Birkeland:
If the current draw for the motor is that low, you can use the DC output from one of the heater regulators on the upgrade board.

Navigation

[0] Message Index