Can't get Speedball to stay stable.

danosol · 6653

« previous next »
Pages: 1 2 3   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #30 on: June 12, 2013, 05:47:15 PM
I'll be up at B-HQ tomorrow, but I can make myself available on Friday or Saturday if you'd like to stop by.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline danosol

  • Full Member
  • ***
    • Posts: 67
Reply #31 on: June 12, 2013, 05:51:30 PM
That would be great, PM me your address and time for Friday.  Also can you grab any parts you think may be required.
« Last Edit: June 12, 2013, 05:59:21 PM by danosol »


Offline danosol

  • Full Member
  • ***
    • Posts: 67
Reply #32 on: June 12, 2013, 07:21:20 PM
Yup it's the LED.  touched it with a chopstick and it lit up and vice versa.


Offline adamct

  • Sr. Member
  • ****
    • Posts: 755
  • Maxxximum CAPacity Crack
Reply #33 on: June 12, 2013, 11:58:20 PM
I know you're not going to like this, but that leads me to believe the problem is one of the solder joints around the LED, not the LED itself...


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #34 on: June 13, 2013, 04:07:00 AM
Adam is correct, that would nearly always be a funky solder joint.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline danosol

  • Full Member
  • ***
    • Posts: 67
Reply #35 on: June 13, 2013, 08:14:47 AM
Too late I already yanked that LED and tried to replace it with another that I pulled off from the previous board and it wouldn't light up at all.  Paul make sure you grab some LED's to bring to your place for tomorrow. 


Offline adamct

  • Sr. Member
  • ****
    • Posts: 755
  • Maxxximum CAPacity Crack
Reply #36 on: June 13, 2013, 08:22:04 AM
Quote from: danosol on June 13, 2013, 08:14:47 AM
Paul make sure you grab some LED's to bring to your place for tomorrow.

I assume you meant to write: "Paul, I would be grateful if you could please bring some LEDs to your place tomorrow."

 ;)



Offline danosol

  • Full Member
  • ***
    • Posts: 67
Reply #37 on: June 13, 2013, 09:10:56 AM
Yes, and appreciative.  ;D

I'm usually not that rude.  Many other things going right now that have caused my gratitude to go out the door.  My apologies Paul and Doc if I have come across rude or unappreciative.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #38 on: June 13, 2013, 09:58:07 AM
Paul has already built a completely new board for the repair.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1 2 3   Go Up
« previous next »