BeeQuiet Manual Photo?

Chris65 · 9465

0 Members and 1 Guest are viewing this topic.

Offline Chris65

  • Sr. Member
  • ****
    • Posts: 341
on: August 28, 2014, 01:15:47 AM
Slowly working my through a BeePre & BeeQuiet build, and was just checking the routing of some wiring to the BeeQuiet.
Thought I'd check the usual 'overhead' shot shown in the kit manuals, but realised there isn't one in the BeeQuiet manual.

Any chance of posting one somewhere? The only photo of the installation is the 'front-on' shot on the manual front cover, same as the product web page.
And there seems to be some differences in wiring (from what I can tell from the angle) & resistor layout from the manual instructions.
Hoped I'd find a photo someone had posted but can't find one.
« Last Edit: August 28, 2014, 03:56:08 AM by Chris65 »



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19822
Reply #1 on: August 28, 2014, 02:22:50 PM
The wiring shot on the product page and first page of the manul was the first one we built.  The resistor orientation shown there is very hard to build, and the expensive rotary switches are more likely to be damage by building it that way.

I will talk to Josh about replacing that photo shortly.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Chris65

  • Sr. Member
  • ****
    • Posts: 341
Reply #2 on: August 28, 2014, 02:29:40 PM
Thanks Paul. ;D