Extended Foreplay Kit Resistor Question.

Natural Sound · 2410

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 995
on: September 23, 2013, 01:10:47 PM
Finally getting around to installing my extended foreplay kit. I'm building the C4S boards and the instructions say to install a 237 ohm 1/4 Watt resistor into R1. My kit came with 4 really tiny 237 ohm 1/8 Watt resistors. Will this be OK or should I get the 1/4 Watts? 

For clarification, the 237 ohm resistors are the same size used in the whispers and padding resistors. I'm pretty sure those are 1/8 Watt.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19369
Reply #1 on: September 23, 2013, 01:17:32 PM
Yes, the 1/8 Watt resistors are the correct parts.  (7/100 Watt resistors would be sufficient here)

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 995
Reply #2 on: September 23, 2013, 01:18:51 PM
Quote from: Caucasian Blackplate on September 23, 2013, 01:17:32 PM
Yes, the 1/8 Watt resistors are the correct parts.  (7/100 Watt resistors would be sufficient here)

-PB

Awesome, thanks for the quick reply, Paul.


Pages: 1   Go Up
« previous next »