News:
September 28, 2023, 05:00:32 PM

Author Topic: Headphone impedance and Bottlehead Kits  (Read 34896 times)

0 Members and 1 Guest are viewing this topic.

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
  • Posts: 9433
    • Bottlehead
Re: Headphone impedance and Bottlehead Kits
« Reply #15 on: July 29, 2011, 08:38:48 AM »
Yeah, that could work, though I think the taps would have to shift from 4K:16/32/64/128 to 8K:32/64/128/256. PJ may correct me on this.
Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Wanderer

  • Full Member
  • ***
  • Posts: 210
Re: Headphone impedance and Bottlehead Kits
« Reply #16 on: December 16, 2011, 03:20:18 PM »
There some decent Yamaha phones around on the used market. Just found my old 1980s period YHD-1 in a drawer - not horrible sounding at all (but I am not running with BH gear)

Yamaha YH-1   150 ohms
Yamaha YH-2   150 ohms 
Yamaha YH-1   150 ohms
Yamaha YHD-1 120 ohms
Yamaha YHD-2 120 ohms 

Kevin R-M
Kevin R-M

Offline ptempel

  • Jr. Member
  • **
  • Posts: 27
Re: Headphone impedance and Bottlehead Kits
« Reply #17 on: June 25, 2012, 05:20:25 AM »
I have these cheap (~$50) headphones:

Superlux
HD668 B - 56 ohms

They have some good reviews on headfi and other sites.  Will upgrade to another set when I get a Crack amp.  This list is helpful.  Thanks.
Philippe Tempel

Laptop -> USB isolator -> JDS Labs ODAC -> Quickie -> Classdaudio CDA-254L -> Polk monitor 5B (upgraded crossover and tweeters).

Offline cspirou

  • Jr. Member
  • **
  • Posts: 18
Re: Headphone impedance and Bottlehead Kits
« Reply #18 on: October 30, 2014, 04:37:01 AM »
Just wanted to mention that I get a 404 when I check this link in the OP post.

http://www.bottlehead.com/et/whichheadphoneamp.htm

Also wanted to add a high impedance headphone I found although it's not being produced anymore.

KOSS MV1, 250 ohm

Production stopped really recently so you should still be able to find new pairs on Amazon or other sites. I got a pair for $80.
Gaël Nguyen
Biophysicist and DIY audio enthusiast

My Setup so far; DIY Fostex fe83en speakers, Koss MV1 Studio Headphones, HIFIMAN re-400 and Topping TP21 amp.

Work in progress; gainclone and an Aleph 30 amp

Offline AudioDave

  • Full Member
  • ***
  • Posts: 106
Re: Headphone impedance and Bottlehead Kits
« Reply #19 on: January 06, 2016, 04:57:24 AM »
FYI,  I have a pair of Bose AE2 headphones at 38 ohms