Woo Hoo!

Doc B. · 48890

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Online Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9670
    • Bottlehead
on: February 12, 2014, 02:39:05 PM
Thanks for the orders! We have just a couple of items that are due in early next week that will allow us to get started on the assembly manual.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline MattTCG

  • Jr. Member
  • **
    • Posts: 20
Reply #1 on: February 13, 2014, 02:30:50 AM
This looks very interesting!!


Offline Wanderer

  • Full Member
  • ***
    • Posts: 210
Reply #2 on: February 13, 2014, 03:27:24 AM
So what is the final ohm rating of the cans? The stock monoprice are low impedance. Not asking you to give away any secrets of construction  but does the final phone end up with high(er) impedance?

Will it work on my headphone wired Quickie till my tax return gets me into a Crack? 

Okay - read the other thread and see the impedance adjustment magic is in the cables. Does this make the phones lower in sensitivity? Any guess as to how low?   
« Last Edit: February 13, 2014, 03:32:37 AM by Wanderer »

Kevin R-M

Online Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9670
    • Bottlehead
Reply #3 on: February 13, 2014, 04:45:56 AM
The headphone kit has been designed specifically to work with the Crack amp. The cans will come with the stock cables in the box, which would allow you to use them as stock with other amps. The stock cables are, IMO, not particularly good. The new cable has been set up to work with the Crack amp, which is the point of the kit.

Did I mention that this is a kit to go with the Crack amp?  :)

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #4 on: February 13, 2014, 05:05:53 AM
Why should the crack addicts have all the fun, us sex addicts want in on the action too, and those who just want a little quickie fun :)

M.McCandless

Offline Jim R.

  • Hero Member
  • *****
    • Posts: 2194
  • Blind Bottlehead
Reply #5 on: February 13, 2014, 01:45:43 PM
Dan,

This is great -- closed back is especially nice. Can I assume that the phone plug is a right angle?

Will be placing my pre-order shortly.

-- Jim

Jim Rebman -- recovering audiophile

Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).

s.e.x. 2.1 under construction.  Want list: Stereomour II

All ICs homemade (speaker and power next)

Online Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9670
    • Bottlehead
Reply #6 on: February 13, 2014, 02:00:14 PM
Hi Jim,

Yes it is a right angle plug.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1168
Reply #7 on: February 13, 2014, 10:22:10 PM
I hope the Headphones are a great success for Bottlehead.

With international postage, import fees and then the exorbitant handling fees from our postoffice/parcel force on top, ordering one to the UK on an individual bases adds substantially to the cost.

Adding it to a combined purchase later makes more sense for me.

 



Shoot for the moon if you miss you will still be amongst the stars!

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #8 on: February 14, 2014, 04:22:18 AM
I'm curious how these would sound with a converted Quickie...  Report back if you have one and are ordering the new phones.

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline Wanderer

  • Full Member
  • ***
    • Posts: 210
Reply #9 on: February 14, 2014, 04:24:15 AM
Quote from: Doc B. on February 13, 2014, 04:45:56 AM
............. The new cable has been set up to work with the Crack amp, which is the point of the kit.

Did I mention that this is a kit to go with the Crack amp?  :)

Dense I am, and should be obvious I am pretty damn dense(ask my wife), a glimmer of light begins to glow.  Think I am getting the hint. Crack first - will work with my old high impedance 'phones - THEN Bottleheadphone kit.     

Thanks!   
« Last Edit: February 14, 2014, 05:27:46 AM by Wanderer »

Kevin R-M

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #10 on: February 14, 2014, 04:38:49 AM
Quote from: denti alligator on February 14, 2014, 04:22:18 AM
I'm curious how these would sound with a converted Quickie...  Report back if you have one and are ordering the new phones.

Will do ;)

M.McCandless

Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19806
Reply #11 on: February 14, 2014, 08:48:52 AM
Quote from: denti alligator on February 14, 2014, 04:22:18 AM
I'm curious how these would sound with a converted Quickie...  Report back if you have one and are ordering the new phones.

The modified Quickie relies on high-ish impedance headphones that are also very sensitive.

IMO - what we have come up with is not a great match for a modified Quickie (very few headphones are).

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline lextek

  • Full Member
  • ***
    • Posts: 88
Reply #12 on: February 15, 2014, 01:23:44 AM
I'm going to have to try these.  Very, interested how they compare with the HD600/Crack combo.  Which I beleive is perfect.  Nice to have a closed bach headphone too.
« Last Edit: February 15, 2014, 01:27:25 AM by lextek »

Bob Lasky

Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #13 on: March 03, 2014, 02:44:15 PM
Any status updates for shipping out the first batch?

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's

Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19806
Reply #14 on: March 03, 2014, 05:45:20 PM
We are doing the photography for the manual this week then I would guess that a week of writing will take place, then packing and shipping!

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1 2   Go Up
« previous next »