Phones for Quickie

denti alligator · 6484

0 Members and 1 Guest are viewing this topic.

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
on: February 15, 2014, 04:41:11 PM
Not to derail the thread, but what would be a good match for the converted Quickie?
« Last Edit: September 09, 2014, 01:42:31 PM by denti alligator »

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5751
Reply #1 on: February 16, 2014, 11:57:52 AM
Well, biblically Mary Magdalene was said to have found Jesus a good match. But Bottlehead has very little expertise to offer on the subject of saving wayward ladies.

Oh wait, you mean a headphone that would match the Quickie-plus-Speco? Anything that meets both of the following two criteria:

1) Sensitivity greater than 105dB/mW. There are very, very few.

2) Matches the impedance of the available taps, which depends on which output transformer you are using. I've posted on those fairly recently.

Paul Joppa


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #2 on: February 16, 2014, 04:08:36 PM
Hah, nice one!

Can you point me to where you've posted on impedance ...

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #3 on: September 09, 2014, 01:43:31 PM
Following up on this:

what is the impedance if I'm using the SEX 2.0 transformers*?

Also, what is  105dB/mW in SPL?

*mine are wrapped in gold-brown not yellow. are these the right ones (the old, not the new)?
« Last Edit: September 09, 2014, 02:26:05 PM by denti alligator »

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #4 on: September 09, 2014, 03:57:18 PM
Bummer. Though those transformers are fairly cheap ($6 on ebay), so I may get some and try this mod.

I'm having difficulty figuring out what 'phones to pair it with. Can anyone help there?

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9538
    • Bottlehead
Reply #5 on: September 09, 2014, 04:33:11 PM
Try Grados.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #6 on: September 12, 2014, 01:22:16 PM
Almost all the Grados have sensitivity of 99.8db, which would be too low, or?


Looks like Sennheiser HD598 is 112db sensitivity...
« Last Edit: September 12, 2014, 01:43:28 PM by denti alligator »

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #7 on: September 12, 2014, 01:59:16 PM
The SEX 2.0 transformers are not Speco transformers, and do not have the appropriate taps for this modification.

-PB

A follow up on this. The transformers have T7010 on them. These aren't the Specos?

And if not, Paul Joppa suggested in the other thread that they might work:

Quote
You mean, I think, the oldest ones from before the Specos. Your transformers are very similar to the Speco, and should work about equally well.

Is this not the case?

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #8 on: September 12, 2014, 02:09:22 PM
The Sennheiser spec is at a volt, not a mW, as PJ mentioned above. Assuming I did the math correctly, that's about 98dB/mW. The Senns also cost about 3 times more than the entry Grados. I've never heard them, so they very well may sound 3 times better. But I'd assume if you're trying to make a Quickie into a headphone amp, the goal is to keep costs low.


Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #9 on: September 12, 2014, 02:12:50 PM
With my quickie the volume is close to being maxed out, but Grados are all about texture and detail not loud volumes and head thumping dynamics so its not a problem for me.

The output transformers have multiple output taps so you can experiment and find the ones that work best for whatever headphones you are using.

M.McCandless


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #10 on: September 12, 2014, 02:14:35 PM
The Sennheiser spec is at a volt, not a mW, as PJ mentioned above. Assuming I did the math correctly, that's about 98dB/mW. The Senns also cost about 3 times more than the entry Grados. I've never heard them, so they very well may sound 3 times better. But I'd assume if you're trying to make a Quickie into a headphone amp, the goal is to keep costs low.

That 112db spec is in mW, I believe. At volt it is much lower. The latter is what Senn have on their site.

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #11 on: September 12, 2014, 02:39:14 PM
Here's where I pulled the volt reference from.  http://en-us.sennheiser.com/audio-headphones-high-end-surround-sound-hd-598 

Quote
Sound pressure level (SPL)    112 dB (1 kHz/1 Vrms)

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #12 on: September 12, 2014, 04:12:17 PM
Here's where I pulled the volt reference from.  http://en-us.sennheiser.com/audio-headphones-high-end-surround-sound-hd-598

I stand corrected.

So I ask again: what decent phones are above 108db?

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #13 on: September 12, 2014, 08:03:41 PM
A follow up on this. The transformers have T7010 on them. These aren't the Specos?
Ah, sorry, mixing up 2.0 and 2.1

Did you end up cutting off the 500 Ohm taps by accident?  (I think that was the brown wire?)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1149
Reply #14 on: September 13, 2014, 03:17:17 AM
Nope. All the wires are in tact.

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable