Nickel vs M4 with a Nickel Pinstripe

tsingle999 · 6747

0 Members and 1 Guest are viewing this topic.

Offline tsingle999

  • Sr. Member
  • ****
    • Posts: 274
  • We are all here because we are not all there.
on: September 07, 2014, 07:26:01 AM
Comparing Robin Hood Parafeeds in my PTG amp. The nickel has a more laid back presentation. The pinstripe has a bit more pop like when a snare drum is hit it just stands out more. I think i have to switch back.

SGS iTransporter with Qobuz & Roon to Optical Rendu to BH DAC (Battery) / Wavelegth Cosecant to BeePre to 300b(ehemoths) to Jagers.
Bottlehead Stat headphone amp with Wavelength Brick DAC


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 994
Reply #1 on: September 27, 2014, 02:58:32 PM
Did you allow adequate time for break-in?



Offline tsingle999

  • Sr. Member
  • ****
    • Posts: 274
  • We are all here because we are not all there.
Reply #2 on: September 30, 2014, 03:28:12 AM
ya they were both played for 100's of hours...

SGS iTransporter with Qobuz & Roon to Optical Rendu to BH DAC (Battery) / Wavelegth Cosecant to BeePre to 300b(ehemoths) to Jagers.
Bottlehead Stat headphone amp with Wavelength Brick DAC


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 994
Reply #3 on: September 30, 2014, 04:21:22 AM
When I upgraded the iron on my SEX 2.0 I went with pinstripes. At the time I couldn't afford full nickel. Based on your observation I'm glad it worked out that way.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9538
    • Bottlehead
Reply #4 on: September 30, 2014, 10:09:30 AM
Yes the M3/M4 iron will sound more dynamic when pushed hard. On the other hand I think you will find the nickel to have better low level resolution. The pinstripe idea is to get the best of both, as were the cobalt lam transformers Mike made many years ago.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Hank Murrow

  • Full Member
  • ***
    • Posts: 221
  • Potter loving music and tubes....
    • Hank Murrow's World of Ceramics
Reply #5 on: October 24, 2014, 06:35:42 AM
I was very lucky to score a pair of those M4/Cobalt TFA 2004's which Mike built to examine the effects of Cobalt in the center of the coil. My pair have ten slices of the Good Stuff, and this stereo amp Paul Birkeland built for me sounds glorious with its JJ 2A3-40 tubes and CuTf Vcaps.

Cheers, Hank