While you folks were having a great time listening, I was hard at work over at my buddy's shop doing some work on the base for the Crack, sanding, dying, and finishing, plus machined the top plate for some hold-down bolts and the filament config switch. Today will begin painting of the plate and when that has hardened, assembly can begin for real. Coming home to read these impressions of the amp was just the icing on the cake and made me feel doubly good about the work I just finished. Also built a new base for the s.e.x. amp out of ply-boo -- both for a better fit and this one is in square. This is a vetical grain carbonized bamboo plywood that my buddy tells me will look great either natural or tinted with a yellow analine dye to give a gold/honey/amber hue. All in all a really productive and fulfilling day working on my BH projects.
If Steve is reading, what were you using for your source at the show?
-- Jim
Jim Rebman -- recovering audiophile
Equitech balanced power; uRendu, USB processor -> Musette DAC -> 5670 tube buffer -> Finale Audio F138 FFX -> Cain and Cain Abbys near-field).
s.e.x. 2.1 under construction. Want list: Stereomour II
All ICs homemade (speaker and power next)