I wanna build something

mkane · 5536

« previous next »
Pages: 1 2   Go Down

0 Members and 2 Guests are viewing this topic.

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #15 on: January 27, 2015, 02:24:45 AM
Paully is being kind.  He has listened to my Paramours for 10+ years.  He listens to a Paramount based 45 amp now.  He previously had the Paramounts configured in 300B/2A3/300B/2A3/45 mode.  It was quite a ride.

The Paramounts have different, better, iron than the Stereomour (one chassis Paramours).  The Paramount in 2A3 mode is direct coupled, eliminating a capacitor from the signal path.  The purer the signal path the better.  One of the reasons SET DHT sounds so good.

I have listened to Paully's system go through many, many changes.  I have been there for the swaps from 300B to 2A3 and then from 2A3 to 45.  That last one required some new output transformers and plate chokes.

The Paramount is more sophisticated than the Stereomour, it costs more for a reason.

My advice would be that if the 2A3 mode will satisfy your speakers and you have the money to buy these, do it.
« Last Edit: January 27, 2015, 03:32:58 AM by Grainger49 »


Online Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5835
Reply #16 on: January 27, 2015, 12:50:01 PM
Speaking here as the designer, and just to clarify a few things:

*  The iron complement is IMHO of very similar sonic quality for Stereomour and Paramount.

*  For 300Bs, only the Paramount iron is suitable (of course)

*  For 2A3s the Paramount iron will perform slightly better in bass extension

*  For 45s, the Stereomour iron will perform slightly better in both bass extension and in damping factor.

*  The Paramount with 45s is not supported (not in the manual, not guaranteed), though it's been done by a few, notably Paully. There are changes using parts we do not supply, and several optional variants such as changing the iron. These are not documented except in various posts on the Forum.

Paul Joppa

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #17 on: January 27, 2015, 02:26:40 PM
  Great place here. While I'm trying to order a Quickie to get my feet wet so to speak, when I push the place order button it say my phone # is incorrect but I don't see where it even asks for one.


Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #18 on: January 28, 2015, 03:11:24 PM
 Got it. Now I need a soldering station and a new multi meter along with some solder and de solder tape.


Offline marantzfan

  • Full Member
  • ***
    • Posts: 148
Reply #19 on: January 28, 2015, 04:34:00 PM
There is a group buy on AK for a nice Hakko soldering iron at a nice price.  I got one before embarking on the last round of builds.  Money well spent.

BeePre, Paramounts 1.1, Eros, Thorens TD-124/AudioMods Tonearm/Ortofon 2M Black, IFI Micro Idsd, HQPlayer,  Altec 604-8G Duplex/620 Cabinets/Markwart Crossovers

S.E.X. 2.1, AKG K701

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #20 on: January 28, 2015, 04:44:38 PM
   Got that, thx


Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #21 on: January 28, 2015, 04:48:08 PM
  Found the de soldering group buy?


Offline marantzfan

  • Full Member
  • ***
    • Posts: 148
Reply #22 on: January 28, 2015, 04:49:03 PM

BeePre, Paramounts 1.1, Eros, Thorens TD-124/AudioMods Tonearm/Ortofon 2M Black, IFI Micro Idsd, HQPlayer,  Altec 604-8G Duplex/620 Cabinets/Markwart Crossovers

S.E.X. 2.1, AKG K701

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #23 on: January 28, 2015, 04:53:48 PM
  Thanks you. Damn, forgot the badge.


Pages: 1 2   Go Up
« previous next »