Star Ground FP2 ???

Bill Epstein · 3074

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline Bill Epstein

  • Full Member
  • ***
    • Posts: 104
on: March 27, 2015, 10:39:43 AM
It was terrific fun forcing a dozen wires into the old  T-14, doing that with turret boards, not so much! Soooo....I'm going to take all the grounds to a single point star ground. Searching here for Star Ground is just a reminder of the T-14 issues ;D

 Question is: where's the best spot? Right in the big space defined by the three turret boards? Back by the transformer? There is no metal back panel.

VPI Traveler/ZYX R50
Cinemag 3440 AH
Steve Brown Caravaggio Phono
Foreplay 2.1
The Twins: 55 Watt Mullard 5-20 KT-88 mono-Blocks
4 Pi Speakers

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9641
    • Bottlehead
Reply #1 on: March 27, 2015, 10:48:23 AM
Best place is as close as possible to the final filter cap negative lead.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Bill Epstein

  • Full Member
  • ***
    • Posts: 104
Reply #2 on: March 27, 2015, 05:55:37 PM
Thanks, Doc.

VPI Traveler/ZYX R50
Cinemag 3440 AH
Steve Brown Caravaggio Phono
Foreplay 2.1
The Twins: 55 Watt Mullard 5-20 KT-88 mono-Blocks
4 Pi Speakers

Pages: 1   Go Up
« previous next »