Hi All
I have just completed the kit and have passed the resistance check but unfortunately fail the voltage check.
1: -0.93
2: -0.91
3: 0
4: -0.91
5: -0.93
6: 0
7: 0
8: 0
9: 0
10: 0
11: -1.2
12: 0
13: -0.92
14: 0
15: 239.2
20: 0
21: 239.2
A1: 0
A2: 0
A3:0.8
A4: 0
A5: 0
A6: -0.9
A7: 0
A8: 0.8
A9: 0
B1: -0.9
B2: 0.8
B3: 0
B4 -0.9
B5: 0
B6: 0
B7: 0
B8: 0
Both valves light up (the 12AU7 in two places) however the LEDs don't.
I have done the gross error checks of checking the orientation of the capacitors, tube sockets, LEDs and the leads on the multimeter (which is why the negative readings don't make sense).
Any help is greatly appreciated.
Cheers