Humming noise when changing inputs

kekoukela · 16382

« previous next »
Pages: 1   Go Down

0 Members and 4 Guests are viewing this topic.

Offline kekoukela

  • Jr. Member
  • **
    • Posts: 35
on: July 01, 2015, 02:08:38 PM
Hi everyone. so I have a submissive that is connected to a crack and computer speakers. I rewired it so it is one input to three outputs. I'm beginning to get a low grade hum when i switch from the crack to the speakers. . . is this normal?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20144
Reply #1 on: July 01, 2015, 04:08:54 PM
The ground connection may be temporarily lifted when switching, does it only hum a little when the switch is thrown, or does it continue to hum once the next position has been reached?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline kekoukela

  • Jr. Member
  • **
    • Posts: 35
Reply #2 on: July 04, 2015, 09:15:23 PM
Sorry for the late reply. and a Happy belated 4th of July!

It's a continual hum. it hums on my crack too. . . to fix it I turn the volume of the crack down and the submissive as well.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20144
Reply #3 on: July 05, 2015, 07:32:11 AM
Quote from: kekoukela on July 04, 2015, 09:15:23 PM
It's a continual hum. it hums on my crack too. . . to fix it I turn the volume of the crack down and the submissive as well.

Can you get a reasonable listening level out of the Crack like this?  With the Crack volume control cranked all the way up, you may have a little bit of noise, but you'll also only be able to use a couple of positions on the Submissive.

If you unplug everything but the source and the Crack, does the hum remain?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »