News:
September 28, 2023, 05:09:28 PM

Author Topic: Cartridge for Thorens TD125 with TP16 mk i arm  (Read 2107 times)

0 Members and 1 Guest are viewing this topic.

Offline 2Bornot2B

  • Jr. Member
  • **
  • Posts: 14
Cartridge for Thorens TD125 with TP16 mk i arm
« on: August 07, 2015, 09:16:01 AM »
Hi Folks
I tried searching the section without much luck. Any suggestions on a medium compliance cartridge for under $200?
Thanks
Bob
boB

Offline mkane

  • Full Member
  • ***
  • Posts: 195
Re: Cartridge for Thorens TD125 with TP16 mk i arm
« Reply #1 on: August 07, 2015, 04:51:32 PM »
 How about a second hand Grado body with an 8mz stylus.

Offline ToolGuyFred

  • Full Member
  • ***
  • Posts: 89
Re: Cartridge for Thorens TD125 with TP16 mk i arm
« Reply #2 on: August 09, 2015, 05:49:40 AM »
My recommendation is the Goldring G1042. If you're on a budget, the 1022 has a lot of the 1042's good points if a little less refined.
John
Amateur Audiophile and Backstreet Boffin.
Original Foreplay with C4S + Sweet Whispers
ParaSEX amps with MQ nickel-cored outputs
Factory-built Lowther Acousta 115s with silver-coiled DX3s, wired in DNM solid-core
KEF active sub (help for the last couple of octaves).
Bottlehead DAC on batteries.

Offline 2Bornot2B

  • Jr. Member
  • **
  • Posts: 14
Re: Cartridge for Thorens TD125 with TP16 mk i arm
« Reply #3 on: August 09, 2015, 06:04:49 AM »
thanks for the replies.

Bob
boB