100uf Film caps on sale

ALL212 · 4061

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
on: December 30, 2015, 03:18:18 AM
Parts Connexion has 100uf Clarity PX caps on sale at about 50% off.  Probably not going to find a 100uf film cap any cheaper than this.

Aaron Luebke

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20265
Reply #1 on: December 30, 2015, 09:03:36 AM

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #2 on: December 30, 2015, 10:12:36 AM
Yeah, crossover membrane. That's what I look for when I buy a cap, I mean, a condensotor. That's because I am a serious audiophiler.
« Last Edit: December 30, 2015, 10:16:36 AM by Doc B. »

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1600
  • Not all engineers are civil
Reply #3 on: December 30, 2015, 12:05:38 PM
Solen make a 250v rated cap that will fit into a stock crack, you can buy them direct for $38cdn which is about $28usd  http://solen.ca/products/capacitors/fast-capacitors-250v-pa-series-metallized-polypropylene/pa10000/

M.McCandless

Offline borism

  • Full Member
  • ***
    • Posts: 158
Reply #4 on: December 30, 2015, 12:57:27 PM
Quote from: Doc B. on December 30, 2015, 10:12:36 AM
Yeah, crossover membrane. That's what I look for when I buy a cap, I mean, a condensotor. That's because I am a serious audiophiler.
Doc, are you making fun of us "Audiophilers"? There are much worse possibilities for neuroses.
« Last Edit: December 30, 2015, 01:08:46 PM by borism »

Boris

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #5 on: December 30, 2015, 01:58:57 PM
Quote
There are much worse possibilities for neuroses.

I'm only making fun of audiophilers who obsess about the crossover membrane in their condensotor.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline caffeinator

  • Sr. Member
  • ****
    • Posts: 272
Reply #6 on: December 30, 2015, 02:54:54 PM


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #7 on: December 30, 2015, 07:20:48 PM
Yeow, do I really need to use 10 of them? Not even sure I could handle one.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline Rhok

  • Full Member
  • ***
    • Posts: 50
Reply #8 on: December 30, 2015, 08:02:12 PM
Doc,

Make a new badge for sale - "Serious Audiophiler" I'd buy one.


Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #9 on: December 31, 2015, 06:04:23 AM
Parts Connexion is out of stock...  :-\



But I did order 100 crossover membranes for my condensotor, three cans of pressure and a left handed monkey wrench!   :o 

Aaron Luebke

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #10 on: December 31, 2015, 07:55:51 AM
Don't forget to have the vacuum in your tubes replaced with fresh vacuum every year as well.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #11 on: December 31, 2015, 08:31:56 AM

Aaron Luebke

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1600
  • Not all engineers are civil
Reply #12 on: December 31, 2015, 09:10:52 AM
You need to cryo freeze it to remove all the bad electrons.

M.McCandless

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #13 on: December 31, 2015, 10:21:52 AM
Use a vacuum cleaner to make sure you have all of the old vacuum removed. I like to keep a couple of vacuum storage bags under my bed for renewal. I open up a vacuum bag and pour some new vacuum over the plates. Then just put the glass back on.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »