Loudspeakers for Quicksand

eskimo · 7662

0 Members and 1 Guest are viewing this topic.

Offline eskimo

  • Newbie
  • *
    • Posts: 3
on: January 29, 2016, 12:13:32 PM
Which kind of loudspeaker,  quicksand can drive ,with Just 4 watt of power?  Thank you
« Last Edit: January 31, 2016, 01:59:11 AM by eskimo »



Offline 2Bornot2B

  • Jr. Member
  • **
    • Posts: 14
Reply #1 on: February 03, 2016, 11:37:38 AM
I have used the Quicksand on my Cornwalls while waiting to build my Stereomour. I have also used it on Mission 70s. FWIW

boB


Offline Cary

  • Full Member
  • ***
    • Posts: 219
Reply #2 on: February 03, 2016, 03:57:43 PM
I use my Quicksand with ADS L470/2, EPI 100, Braun L200, Fostex 103en bass reflex, ADS L200 speakers.



Offline eskimo

  • Newbie
  • *
    • Posts: 3
Reply #3 on: February 09, 2016, 11:02:01 AM
In my setup i have a pair of Martin Logan Motion 15, could this amp drive them?  And any Bottleahad amp could do too?



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9648
    • Bottlehead
Reply #4 on: February 09, 2016, 11:19:26 AM
At 92 dB/2.83V/1m sensitivity you could probably run them pretty nicely with the Kaiju wired for 4 ohms output. The 4 watt amps - Stereomour II, Seductor, Quicksand, should all sound pretty good too, but they won't play as loud.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline eskimo

  • Newbie
  • *
    • Posts: 3
Reply #5 on: February 10, 2016, 12:13:32 PM
Thank you,  i usually don t listen at music  very loud,  but what about dynamic and bass punch with quicksand?  Kaiju is too expensive for me
« Last Edit: February 17, 2016, 12:54:13 AM by eskimo »