1 Speedball LED not lit. [resolved]

StivVid · 975

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline StivVid

  • Full Member
  • ***
    • Posts: 67
on: April 10, 2016, 11:52:47 AM
Hello all.

Just finished wiring the small board from the Speedball kit to my Crack.  When I power up to do voltage checks, I get 3 LEDs lighting up.  The LED nearest the IB terminal on the board remains dark.  Voltage check readings are as follows:

OA=  72
IA=  184.2
B-A/B=  0
IB=  184.3
OB=  59.1

Anyone have a diagnosis?
« Last Edit: April 12, 2016, 01:57:44 PM by Caucasian Blackplate »


Offline StivVid

  • Full Member
  • ***
    • Posts: 67
Reply #1 on: April 10, 2016, 12:05:35 PM
Never mind...  I think I see the problem.  B side transistor installed backwards.  I'll flip that and see if it fixes things.


Offline StivVid

  • Full Member
  • ***
    • Posts: 67
Reply #2 on: April 10, 2016, 12:37:05 PM
That was it.  Sorry, everyone.  Just wasn't paying attention to part orientation.


Pages: 1   Go Up
« previous next »