Connecting Crack Amp to an Audio Interface

amerk84 · 2032

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline amerk84

  • Jr. Member
  • **
    • Posts: 22
on: May 12, 2016, 07:26:28 PM
I have a MOTU Ultralite Mk3 audio interface that I use with my computer. The MOTU only has 1/4" balanced/unbalanced outputs (see image attached). Are there any guidelines I should follow when looking for a 1/4" to RCA cable to connect the MOTU audio output to the RCA inputs on my Crack amp?


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9777
    • Bottlehead
Reply #1 on: May 13, 2016, 03:46:22 AM
Easiest thing to do is buy 1/4" male phone plug to female RCA phono plug adapters and put them on one end of your regular interconnects.

Dan "Doc B." Schmalle
Former President For Life
Bottlehead Corp.

Offline amerk84

  • Jr. Member
  • **
    • Posts: 22
Reply #2 on: May 13, 2016, 06:46:38 AM
Is there a 1/4" male phone plug to female RCA phono plug adapter on par with the Bottlehead RCA cable or will any adaptor make due?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20265
Reply #3 on: May 16, 2016, 06:43:36 AM

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »