Low volume right channel [resolved]

Karl5150 · 4952

0 Members and 1 Guest are viewing this topic.

Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
on: June 10, 2016, 12:18:55 PM
As I said in my gallery post I have a very noticeable channel imbalance. Side to side tube swapping doesn't help. When I swap in and out cables on the Quickie the right channel (being fed by the Quickie's left) is still low.
I went back through the resistance and voltage checks. All the resistances run +10% consistently.
All 0 ohm, OL & 0 V are as they should be.
I noticed the first few voltages started +10% but slowly dropped as everything warmed up.
After it was stable all the 95-100 V terminals read +1% to +6%.
All the 212-425 V terminals read -2% to -4%.
Terminal 12 (30-55V) reads 48 V but terminals 18 & 28 read 23 V.
So it seems the left channel is high, not the right channel being low.
Any insight from the crew would be appreciated.
« Last Edit: June 14, 2016, 07:35:49 AM by Caucasian Blackplate »

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9672
    • Bottlehead
Reply #1 on: June 10, 2016, 12:47:58 PM
Maybe double check the output transformer wiring?

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
Reply #2 on: June 11, 2016, 06:58:21 AM
 Oooops, and that's why he's the Doc.
Thank you for the diagnosis, the kits and the music!

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77