Monoblock wiring

Karl5150 · 9984

0 Members and 1 Guest are viewing this topic.

Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
on: March 10, 2017, 10:24:46 AM
Since I'm always thinking about my next project, or the one after that, I thought about how to wire a pair of 8 ohm Seductor mono-blocks without  the redundant RCA inputs or binding posts. Will this work or will I smell smoke?

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19823
Reply #1 on: March 13, 2017, 06:49:31 AM
On the input side, I would just run two separate cables from the same RCA jack.  Your diagram for the output transformers won't cause any problems.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
Reply #2 on: March 14, 2017, 03:25:02 AM
Thanks for looking Paul. I will take your comment on not causing any problems to also mean that the expected 8W x 1 ch. would be achieved.

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19823
Reply #3 on: March 15, 2017, 03:36:00 PM
Yes, you would indeed get 8W (with good headroom) in that configuration.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man