Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Blooze on July 02, 2017, 10:52:06 AM

Title: Crack height dimension
Post by: Blooze on July 02, 2017, 10:52:06 AM

I picked up a Crack kit for Xmas and finally will be getting a chance to build it. I'm also in the process of needing a new audio rack and was wondering if one of you fine folks could give me the height needed between shelves for the Crack. I figure it will be tallest with the 6AS7 correct?

Title: Re: Crack height dimension
Post by: BZ58 on July 02, 2017, 11:10:44 AM

My build measures 7 1/2" - so 8" or more should be enough room. I have extra bumpers for feet and added a 6SN7W with the adapter.

Title: Re: Crack height dimension
Post by: Blooze on July 02, 2017, 02:17:24 PM

Thank you very much!

Title: Re: Crack height dimension
Post by: adeep42 on July 03, 2017, 09:35:29 AM

With my feet and a Tung Sol 6520, you would need at least 9 inches.

Alan

Title: Re: Crack height dimension
Post by: Blooze on July 03, 2017, 06:08:22 PM

Quote from: adeep42 on July 03, 2017, 09:35:29 AM

With my feet and a Tung Sol 6520, you would need at least 9 inches.

Alan

Thanks Alan.  What feet do you have? I just have the little rubber bumpers under my Seduction, but was looking for something a little better looking.

Title: Re: Crack height dimension
Post by: adeep42 on July 04, 2017, 05:01:55 AM

Found my purchase on eBay. His offering isn't there any more but these look the same.

Search for "4 Pcs 20 x 10mm Silver Tone Aluminum Cabinet CD PC Speaker Amplifier Feet Pads".

Mine did come from Hong Kong or somewhere else in China.

Alan