Crack height dimension

Blooze · 2081

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Blooze

  • Jr. Member
  • **
    • Posts: 20
    • My Electronics Pics
on: July 02, 2017, 10:52:06 AM
I picked up a Crack kit for Xmas and finally will be getting a chance to build it. I'm also in the process of needing a new audio rack and was wondering if one of you fine folks could give me the height needed between shelves for the Crack. I figure it will be tallest with the 6AS7 correct?


Offline BZ58

  • Full Member
  • ***
    • Posts: 55
Reply #1 on: July 02, 2017, 11:10:44 AM
My build measures 7 1/2" - so 8" or more should be enough room. I have extra bumpers for feet and added a 6SN7W with the adapter.


Offline Blooze

  • Jr. Member
  • **
    • Posts: 20
    • My Electronics Pics
Reply #2 on: July 02, 2017, 02:17:24 PM
Thank you very much!


Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #3 on: July 03, 2017, 09:35:29 AM
With my feet and a Tung Sol 6520, you would need at least 9 inches.

Alan


Offline Blooze

  • Jr. Member
  • **
    • Posts: 20
    • My Electronics Pics
Reply #4 on: July 03, 2017, 06:08:22 PM
Quote from: adeep42 on July 03, 2017, 09:35:29 AM
With my feet and a Tung Sol 6520, you would need at least 9 inches.

Alan

Thanks Alan.  What feet do you have? I just have the little rubber bumpers under my Seduction, but was looking for something a little better looking.


Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #5 on: July 04, 2017, 05:01:55 AM
Found my purchase on eBay. His offering isn't there any more but these look the same.

Search for "4 Pcs 20 x 10mm Silver Tone Aluminum Cabinet CD PC Speaker Amplifier Feet Pads".

Mine did come from Hong Kong or somewhere else in China.

Alan


Pages: 1   Go Up
« previous next »