buzz in left channel [resolved]

pfontana · 1689

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline pfontana

  • Jr. Member
  • **
    • Posts: 19
on: April 23, 2020, 12:21:53 PM
Hi,
I finished my Kaiju around a month ago.  It's been working great... until now.
I have a left channel 60Hz hum almost all the time.  Once in a while it goes away and stays away.
I've only attached my left speaker cable and disconnected everything else.  The right channel works great.
My initial hum pot measurements were 5mv.
Any ideas?
thanks,
Philip
« Last Edit: April 28, 2020, 06:22:46 AM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19766
Reply #1 on: April 23, 2020, 12:24:46 PM
Do you have the DC filament upgrade? 

Can you listen to a 120Hz and 60Hz tone on YouTube and tell us which you hear?

5mV on the speaker posts without the DC filament upgrade wouldn't be abnormal.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline pfontana

  • Jr. Member
  • **
    • Posts: 19
Reply #2 on: April 27, 2020, 07:02:54 PM
Hi,
After inspecting the amp, I re-soldered a few spots on the left channel.  It fully took care of the hum.  I'll let you know if it comes back.  And I have the DC filament but haven't installed it yet.  I thought I'd get used the standard amp first for awhile.
Thanks,
Philip


Pages: 1   Go Up
« previous next »